1
/
of
1
BIG WILLY'S
"HOG WILD™" decal
"HOG WILD™" decal
Regular price
$15.00 USD
Regular price
Sale price
$15.00 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Size; 10 in x 9.03 in
INSTRUCTIONS;
1. Prepare the Surface
- Clean: Thoroughly clean the area with a damp cloth or rubbing alcohol to remove dust, dirt, and oils.
-
Dry: Ensure the surface is completely dry with a lint-free cloth.
-
2. Position the Decal (Hinge Method)
-
Place:Position the decal (with backing and transfer tape) on the surface as desired.
-
Tape:Apply a strip of masking tape horizontally across the middle of the decal, creating a hinge.
-
-
Flip & Peel:Lift the decal by the tape hinge, then slowly peel off the backing paper from one side, keeping the decal taut.
3. Apply the Decal - Smooth: Lower the decal onto the surface and use a squeegee (or credit card) to firmly press it down, working from the center outwards to push out air and solution.
-
Repeat: Re-tape the other half if needed, flip, peel, and squeegee the rest.
4. Remove the Transfer Tape -
Peel Slowly:Gently peel the clear transfer tape back at a sharp angle (close to the surface), not straight up.
-
Fix Bubbles:If any vinyl lifts, stop and press that section back down before continuing.
-
5. Final Touches
-
Press:Use the squeegee one last time over the entire design to ensure it's fully adhered.
-
Dry:Wipe the surface with a paper towel to remove any remaining moisture or solution.
-
